Stirrer Accessories
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 12000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 12000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences PFA Coated Hastelloy C-276 Thermocouple: 1/4" Diameter x 26" Long, Type "T", Fits Reactor Capacity: 10L-20L
PFA Coated Hastelloy C-276 Thermocouple: 1/4" Diameter x 26" Long, Type "T", Fits Reactor Capacity: 10L-20L. Thermocouples for use with Chemglass process reactors. Available in both ¿T¿ (blue connections) and ¿K¿ (yellow connections). The detachable thermocouples are for direct insertion in the reactors using a CG-1048-A or CG-1042-E thermocouple adapter, while the 4¿ long Hastelloy C-276 style is for use with the CG-1971 baffles and adapters. Detachable type thermocouples have a standard male plug (OST) and require a coiled extension cord for connection to the CG-3498 temperature monitor. The 4¿ long Hastelloy C-276 thermocouples are supplied with a 4ft FEP insulated cord having a standard male plug (OST).PLEASE NOTE: THE 1/2¿ DIAMETER PROBES HAVE A TRANSITION TO 6¿ OF PTFE LEADS AND ARE CLEAR FEP PTFE COATED.Maximum Probe Temperature Based on Coating- FEP is 200¿C and the Black PFA is 250¿C
Bellco Glass, Inc. Adj. Paddle Blades 15 - 36 L
Adjustable PTFE Microcarrier paddle blades only , 15-36L Paddle dimensions: 1 1/2" x 9" 1/2". MADE IN THE USA.
Bellco Glass, Inc. L-Shaped Sparger W/Holes,3L For 10mm Port
Stainless steal sparger has stainless steal frit with 10 micron porosity for introduction of gentle stream of air bubbles into bioreactor vessel beneath the impeller of mammalian cell culture. Fits into 10mm port on 3L metric headplate. L-Shaped Hose Barb Sparger With Drilled Holes,3L. Material: 316L with electropolish finish. Overall Length: 11 3/16". Insertion Length: 9 3/4". Hole Sizes: 0..06" (7 holes). Supply complete: O-Ring, SST Washer & Nut.. MADE IN THE USA
Arrow Engineering Type 316 Stainless Steel VPP Series Propeller 5-1/4"dia. 3 Blade
The Arrow Mixing Products Type 316 Stainless Steel VPP Series 5-/14″dia. 3 blade propeller with 5/16-24 tapped hole. Our stainless propeller selection is engineered for optimal performance, ensuring smooth and consistent mixing for various industries, including pharmaceuticals, food processing, and chemical production. With a carefully crafted design, these propellers maximize power and efficiency, helping you achieve the best results for your mixing needs.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 5000mL to 12000mL Flasks, 24mm Width x 130mm Length, 29/42 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 5000mL to 12000mL Flasks, 24mm Width x 130mm Length, 29/42 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 90° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 100mm Dia, Fits Shaft Size 10mm, 90¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Ace Glass, Inc. PTFE agitator, (4) 90mm anchor style blades, fits 10mm knob style or drilled shafts
AGITATOR PTFE 10MM 90MM BLADE
Chemglass Life Sciences 3/8" to 5/16" Male Adapter
3/8" to 5/16" Male Adapter. Tru-Stirrer Shaft Coupling Replacement Component.
Arrow Engineering PHC-750 Power Hold Clamp
The Arrow Mixing Products PHC-750 fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) and can be used with Stand ASE-750 for a quick, complete laboratory mixer setup. It is is engineered for precision and durability, making it an essential tool for securing various materials during mixing and processing applications.
Ace Glass, Inc. Chuck, jacobs, adjustable, up to 3/8in stir shaft, fits 5/16inmotor shaft
CHUCK JACOBS 5/16IN MOTOR
Chemglass Life Sciences 25.4mm Stirrer Shaft Retainer, Nylon, Safety
25.4mm Safety Collar, Nylon. Designed to be placed on the stirrer shaft directly above the bearing. The collar provides protection against the stirrer shaft dropping and hitting the bottom of the vessel. The collar also acts as a dust cover and permits the stirrer to be positioned off the bottom of the vessel. Supplied complete with one each CG-2049 PTFE gasket of the corresponding size.